Hey there! So first it’s important to know that HangSmart has been UL tested to hold up to 450lbs per UL regulation 2442. The product max weight limit is 150lbs. UL regulations test your claim X2 plus 100lbs.  

HangSmart is based on 2 factors that make the product work so well.  

It relies on the use of physics. It will never come out of the wall on its own or rip out, if installed properly solely due to the physics behind the way in which our product works. The mount itself holds up to 150lbs. But even if you increased the weight up to 250-300 (which we have for testing purposes in many labs), nothing will happen. No TV weighs close to that weight limit.  

It relies on the way the mount is designed. The nails are supported at that 45 degree angle due to the design of our mount and how the raised bulged holes are designed. Those raised holes that the nail goes into supports the nail and keeps it at a 45° angle.  

Combined with the placement of the nails (2 on top and 2 towards the bottom and wider apart), The HangSmart acts as a natural anchor into the wall, and would not allow for it to fault. Remember the weight is going 90 degrees straight to the ground. 

When installed, the nails go in at a 45 degree angle which anchor to the wall, with our patented elastic mount. This has been tested and proven to securely attach any TV to a wall. Without the need to locate studs, our two mounts (separated) create two anchors that distributes the weight evenly and downward at a 90-degree angle. The weight does not sit at the top or base of the nails, but rather it works together with the mount to create an anchor driving the pressure 90deg downwards and against the wall. 

Feel free to watch the live Pressure Test Demo here: 

https://vimeo.com/896697593 

Feel free to check out the product certification page here: https://hangsmarttv.com/pages/product-testing 

Here is our national tv airing on QVC: https://youtu.be/cLqz49f4rBg 

Featured on FORBES: https://www.forbes.com/sites/scottkramer/2023/08/27/a-clever-and-easy-way-to-hang-your-tv-on-a-wall---by-yourself/?sh=3f4c796a4a1a 

HangSmart wins "Best of Show" at the CEDIA integrator Expo: https://hangsmart.com/blogs/hangsmart-blog/hangsmart-tv-best-of-show-winner-cedia 

Yes, it is absolutely a real and legitimate product. HangSmart is a great product that thousands of our customers LOVE! HangSmart is currently being sold nationwide at all Walmart retailers, on Amazon, on HangSmart.com, and other box retailers.

• HangSmart has been featured on FORBES and other publications: https://www.forbes.com/sites/scottkramer/2023/08/27/a-clever-and-easy-way-to-hang-your-tv-on-a-wall---by-yourself/?sh=3f4c796a4a1a

  
  

• Hangsmart won “Best of Show” at the 2025 CEDIA Expo for commercial and residential integrators!

  
  

• HangSmart has aired on national television both on QVC & HSN: https://youtu.be/cLqz49f4rBg

  
  

• HangSmart has received hundreds of thousands of 5 star reviews from customers all over the world. See our reviews here: https://hangsmart.com/pages/reviews

  
  

• HangSmart has a patent on it’s design and structure.  

  
  

• Check out our “How To” installation page here providing you with many tips, tricks, and videos of the product and installation guides.  

Each box holds one tv. There are two separated mounts in each box (one for each side of your tv). Our 2 pack (the holiday bundle), will hold two tvs.  

Definitely check out our full "How To" Installation video on our website and at the link here: https://hangsmart.com/pages/howto 

This video will show you exactly how to install the HangSmart TV, and walks you through the installation of the product, especially if its the first time. If you install it a second time, youll breeze right through it. But this video really shows a good detailed way of installing the product from start to finish. 

We also have a bunch of other shorter videos on this page, which will answer other questions you may have and show you some tips and tricks (like spacing behind the tv, using the rubber bumpers, removing the hangsmart, and more). 

HangSmart can hold up to 100" TV's and up to 150 lbs with ease! The majority of our customers have a 75"-87" TV. Weve had plenty of customers with 98" TVs. TV's don't weight that much nowadays. In fact, HangSmart has been UL rated and tested to hold up to 450lbs per UL regulation 2442. The product max weight limit is 150lbs. UL regulations test your claim X2 plus 100lbs. So during testing, it held more than double our weighted claim. 

HangSmart is meant to be a static mount. While you cannot turn the TV left or right (as that would require a full tilt/full motion swivel mount), you can still slightly adjust the tilt downwards or have the TV flush. Please keep in mind, having the TV swivel is a preference and those that prefer this will opt to get a swivel rack. HangSmart is just a better alternative to the static (non-moveable) racks already sold on the market that require screws and anchors. To adjust for a downwards tilt, you will want to use longer screws behind the tv and between the hooks. You would apply the white spacers in the box. If the metal hook is separated out from the tv, naturally you will get a downwards tilt. Alternatively, if you wanted your TV to be flush against the wall (no downwards tilt), then you would use the shortest screws and have the TV hooks sit firmly against the tv. This will shorten the distance between the wall and the TV, thereby eliminating a downwards tilt.  

Furthermore, every TV is different, and the space and tilt will also depend on the curvature of the TV and where your mounting holes are placed on the back of the tv. For TV's that have a completely flat back, you will have a bit more space than those that have a slightly curved or indented back. And with TV’s that have a mounting holes slightly lower, you’ll get a slight forward tilt, which will give you some more added room behind the TV. With HangSmart, you will have much more flexibility to manage cables as opposed to traditional mounts. Most flush traditional mounts require you to physically take your TV off the mount in order to place or manage any cables. With HangSmart TV, you can pull the TV slightly out from the bottom giving you room to add and manage any cables you'd like!  

In all cases you can certainly make the TV flush with the wall and eliminate any angle by placing a set of rubber bumpers (included in the kit) to the back, bottom of each side of your TV. This will allow your TV to sit flush with the wall and remove any angle you may get post installation. These are also included in the kit. 

For future questions or frequently asked questions, we have a lot of this information listed on our FAQ's page on our site. We also have a full media/video page which talks about and shows demonstrations answering a lot of these questions. This can be found here as well: https://hangsmart.com/pages/howto 

Yup, it works on brick, cement, concrete, stone, wood, and any other type of wall as well. Only for those walls, you would use our included screws and anchors. You’d use the two middle holes of the mount as opposed to the bulged/raised holes used for the nails and drywall/plaster. And the install would be the same as any other traditional mount. But you’re still getting a much smaller, sleeker, and less bulkier tv mount.  

It’s also a DIY process, just a different type of install. You would take an 8mm drill bit, pre make a hole into your wall. Insert the white anchor with a hammer, place the mount over the white anchors, and screw the screws in. All done.  

It’s super easy. You can also still use the color guide provided so you know the placement of the two mounts on the wall. Youd take the color guide, place it on the wall, and then make your drill bit hole into the holes of the color guide, because the mount will match up with those colors once you place it over the guide. 

No HangSmart user has encountered a problem with plugging their cables into the tv once the TV is installed. In fact, it’s much easier to plug cables in due to the fact that HangSmart sits on hooks. So, you DO NOT need to remove the tv off the mount each time you need to plug cables in, like you would with other traditional static TV mounts, where they are locked in place and you need to take the tv off the wall.  

With HangSmart, you would just pull the TV towards you from the bottom, and easily plug any cables to need to access in the back. If you feel you want even more separation from the wall and the TV, just use longer screws for the back tv hooks, and add a set of white spacers between your hook and your tv. This will give you more separation between the wall and the TV.  

Additionally, no tv mount is also a wire concealer. You cant "hide" your wires with any tv mount, if the plug and outlet runs to the floor. For that, you would need a wire concealer kit (which we happen to sell on our website under the wire concealer tab). This allows you to run the wires behind the wall. For those that have outlets directly behind the tv, you can eaisly tuck the cables behind the tv. If you look at any other video we put out on social media (we have hundreds of videos), you'll see that we can very easily tuck the cables behind the tv for tvs that are mounted directly in front of a wall outlet. 

We actually recommend leaving it behind the TV for a few reasons. We mention this in our "how to" video, as well as in the instructions.  

1. You don't see it behind the TV. So as long as you don't see it, it shouldn't bother.  

2. When you need to remount, upgrade, or reinstall the HangSmart, it's there and you don't lose it. Believe us when we say, we have MANNNYY customers who reach back out to us asking to purchase another color guide because they ripped theirs or threw it out and ended up needing to remount the HangSmart in some capacity.  

So it's always a good idea to just keep it behind the tv as that's part of the overall concept. 

Yup! HangSmart works on curved TVs. We've mounted many curved TVs. Always remember, the mounting holes on any curved tv is always at the center (flat back part of your TV). Otherwise, you wouldn't be able to mount any curved tv to a flat wall with any tv mount.  

You can certainly still install the mount to the TV when the mounting holes are slightly towards the bottom. We've mounted hundreds of TV's which have the holes towards the lower end. This is really common with TCL and Roku tv's. You may get a slight tilt downwards because of the placement of the TV's mounting holes, but this is why we include the black rubber bumpers in the kit. You can add those rubber bumpers to the back, bottom of each side of your tv to flush out the tv a bit. 

Definitely check out our full "How To" Installation video on our website and at the link here: https://hangsmart.com/pages/howto 

This video will show you exactly how to install the HangSmart TV, and walks you through the installation of the product, especially if its the first time. If you install it a second time, youll breeze right through it. But this video really shows a good detailed way of installing the product from start to finish.  

We also have a bunch of other shorter videos on this page, which will answer other questions you may have and show you some tips and tricks (like spacing behind the tv, using the rubber bumpers, removing the hangsmart, and more). 

HangSmart is compatible with every TV up to 100" and 150lbs. If your TV can be mounted with any other TV mount on the market, it can be mounted with HangSmart as well. Every TV should have mounting holes in the back, so you would just install the screws and hooks to the mounting holes and finish the rest of the installation with HangSmart. 

Yup! In fact, we have hundreds of customers who love HangSmart for mobile homes, RV, trailers, and more. The only difference is that you would need to install it with screws and anchors as opposed to the nails. But, it works great otherwise. The mount (being as sleek and small) as it is, makes it perfect for those type of homes. For RV's and trailers, its great because you can easily take the TV off the mount during traveling and transit, and then put it right back on when stationed. Its super easy to take on and off. 

You can certainly still mount to studs using our product. It's not needed, but for those who want to mount to studs, you can. We provide the option for a screw and anchor installation in case you really wanted to mount to studs. You would just use the included screws and anchors and two middle holes of the mount. The beauty of HangSmart is that you can place your TV ANYWHERE on the wall, without having to worry about whether a stud will be there or not. Our product has proven to work without studs, so its not needed. We show this clearly in our pressure test video and explain the physics behind why nails at a 45 deg angle combined with our mount and design will hold with no issues whatsoever. We have over a million customers, are at Walmart (and other box stores), and havent had a single failed unit to date. Nothing to worry about, but if you wanted to mount to studs, you still can. 

This typically happens ONLY with really small tv’s. Some TV manufacturers put their top holes all the way at the top of the monitor. But that shouldnt be an issue. You can use the lower mounting holes for any TV under 70". The kit should come with black rubber bumpers and you can add those to the back bottom of each side of the tv to flush out that slight forward tilt, if you get one. 

YUP! Works on lathe and plaster just the same as it does drywall. In fact, half of our customers installed into plaster. Many many homes have plaster. 

Yup! You should have more than enough space. We have never encountered a problem with the plug behind the TV not having enough space. If you need additional space, there are longer screws and white spacers that are in the box that you can use. Using the longer screws will give you added, separation between the wall and the TV. Additionally, you can use the black rubber bumpers in the kit by placing them at the back/bottom of each side of the TV. This will allow the TV to sit straight and not have the bottom of the tv rest against the wall. By doing this, and using longer screws, it will give you more space between the TV and the wall.  

Ofcourse! First things first… we offer a first time buyer discount on our site. Plus free shipping so you can’t beat that….  

Secondly,  

QUALITY:  

Our mount is made of a highly concentrated flex nylon, which is a grade below PVC/steel & is designed to ensure the weight limit of up to 150lbs whereas, with traditional racks, you need to purchase a different steel bulky rack that is specified to fit the size of your tv. This flex nylon material cost a lot more to produce and is needed in order for our method to work and ensure its durability and security. When purchasing a HangSmart, you are getting a custom and carefully crafted mount made out of metal stamping (molding). Unlike every other tv mount on the market, we’re not cutting large and cheap pieces of steel, which makes for the cost of that metal rack cheaper, and your installation experience harder. Big pieces of steel racks that you are used to purchasing make your life much more difficult, they’re big and bulky, and are WAY outdated causing major wall damage. Making something so small, that can hold so much weight, while also making it easy for EVERYONE to install with 3 simple steps, takes years of innovation, thought, manufacturing, cost, patents, and more. 

EASE OF USE: 

If you walk into any store that sells traditional wall mounts, there are tons of flush mounts that can cost north of $100. Alternatively, there are mounts that can cost $29. However, it’s important to consider the following. The cheaper wall mounts only allow you to hold up to a certain size TV. Additionally, they cause major wall damage and often need a handyman to install. You MUST find the studs in your wall, which also limits where you can place your tv. If you want the tv in the center of your living room, but your wall studs are not aligned to give you that placement, your tv must go where the studs are, hence off centering your tv. With HangSmart, you don’t need to worry about that, as you DO NOT need to locate the studs or even worry about them. Install your tv wherever you’d like on the wall. Lastly, traditional racks are BIG & BULKY. 

SAVES YOU MONEY: 

With HangSmart, you can install it yourself, meaning you don’t need to hire a handyman, which on average cost $100/tv.  

HangSmart also reduced the amount of wall damage inflicted on your wall. So, if you are renting and need to move, you will not have MAJOR holes that need a big repatching job, as the holes created by HangSmart are the size of a dot made by a pen.  

HangSmart can be remounted many times, and used on ANY size tv, while being able to hold 150lbs. With normal racks, you need to buy a specific rack size to fit your tv size. If you upgrade your tv? You now need to buy a new rack, and potentially re-hire the installer to remount your tv. 

It’s really easy to remove the Hangsmart from the wall. Just take a set of pliers and remove the nails by pulling them out. In any case, here’s a video showing the full removal process, which also shows how we lightly tap a hammer below the mount to slightly raise the nails up a bit. https://vimeo.com/935515560  

To get the tv off the mount, you want to lift the tv forward from the bottom (tilting the tv) and then lifting it up and out. Because the mount has a security ridge, the hooks need to clear the ridge at the base of the mount. You can see this in our full "How To" video on our site. If you scroll to the 7:44 time on the video, youll see us demonstrating this.  

https://vimeo.com/896381096 

Some Tv's have the screws already pre installed into the TV. You just need to remove the screws and continue with the installation. If the screws they provide are long enough to fit, you can certainly use the screws that you just removed. Otherwise, you can try one of the screws that came in our kit. 

A couple things to consider before diving deeper into finding the solution.  

1. Does your TV come with leg stands? Some TVs use the same screws that fit your tv leg stands to be used for the back of the tv. So, if your tv has leg stands, the TV will come with screws that fit those stands. In most cases, those same screws fit to the back of the TV as well. So you would use those screws with our hooks. For example with all ROKU TVs or TCL’s. 

2. It could be the case that some of our screws are able to be screwed in but there’s extra space left between the screw and the hook. In that case, you would use the white spacers we provide in the box to fill the gap and ensure a tight fit. The spacers will fill the gap between the screws and the tv.  

If none of those two options solve this issue. I would recommend searching your TV brand and model on Amazon, and grabbing the exact screws from there. Keep this in mind, the screws we provide are universal VESA standard screws. We actually offer more screws in the kit than any other mount on the market. However… there are some TV’s that don’t follow the VESA screws sizes and require you to use their own screws for their own reasons. If our screws aren't able to fit, the same would be the case with any tv mount purchased, as they all offer the same VESA screws.  

But let's see if the first two options are viable. If not, you can also provide me with your model number and I can help search to find your tv screws there and provide you with the link.  

The best option in the meantime is to search the model number on amazon and grab the mounting screws from there (if the above options dont work). Once you secure those, the rest of the installation will be smooth. 

The drywall or plaster wall has very little bearing on how the product works. The weight does not sit at the top where the nails are placed. Rather the pressure is placed against the base of the mount and against the wall. Understandably, it might seem counterintuitive that a wall can support your TV without traditional studs, but HangSmart's innovative design redefines mounting physics. The wall's composition—be it drywall or plaster—doesn't directly impact the mount's performance. Instead of relying on the wall's surface alone, our mount's unique dual-piece structure leverages the wall's entire depth for stability. It’s a counterintuitive balance.  

The design distributes the TV's weight across four points, not just at the top, ensuring an even load distribution. This setup, with two nails above and two spaced wider below, engages the wall's inherent strength, channeling the load horizontally and reducing the downward pull. Our load test videos aren't just demonstrations they're a peek into the engineering behind HangSmart, illustrating how and where the pressure is applied to ensure your TV stays securely in place. 

When installed, the nails go in at a 45 degree angle which anchor to the wall, with our patented elastic mount. This has been tested and proven to securely attach any TV to a wall. Without the need to locate studs, our two mounts (separated) create two anchors that distributes the weight evenly and downward at a 90-degree angle. The weight does not sit at the top or base of the nails, but rather it works together with the mount to create an anchor driving the pressure 90deg downwards and against the wall. 

Pressure Test Demo 

https://vimeo.com/896697593 

The space behind your TV depends on the curvature of the TV and where your mounting holes are placed on the back of the tv. For TV's that have a completely flat back, you will have a bit more space than those that have a slightly curved or indented back. And with TV’s that have a mounting holes slightly lower, you’ll get a slight forward tilt, which will give you some more added room behind the TV. With HangSmart, you will have much more flexibility to manage cables as opposed to traditional mounts. Most flush traditional mounts require you to physically take your TV off the mount in order to place or manage any cables. With HangSmart TV, you can pull the TV slightly out from the bottom giving you room to add and manage any cables you'd like!  

We provide spacers in the box for added space (if needed), giving you even more room between the wall and the TV. The box comes with universal TV screws. You would use the longer screws that match your TV and place the spacers in between your TV mounting holes and your included TV hooks. Additionally, the natural tilt downwards you may experience after hanging the tv depends on where your input holes are placed behind the tv and whether or not your tv has a flat back or slightly thicker bulged back. Either way, in all cases you can certainly make the TV flush with the wall and eliminate any angle by placing a set of rubber bumpers to the back, bottom of each side of your TV. This will allow your TV to sit flush with the wall and remove any angle you may get post installation. These are also included in the kit. 

HangSmart has been tested by MULTIPLE labs (and on a yearly basis) as required by our policy and our retail partners (like Walmart and other box stroes). HangSmart has been UL tested to hold up to 450lbs per UL regulation 2442. The product max weight limit is 150lbs. UL regulations test your claim X2 plus 100lbs. HangSmart has also been tested by Intertek and Product 360. For more information, please see our product testing & certification page here: https://hangsmart.com/pages/product-testing 

To understand the exact height of your tv and where it should be placed after installation, you want to measure from the top mounting holes of your TV to the very top of the TV.  So for instance:  

1. you would take your measuring tape, place the 1 inch mark directly in the center of your upper mounting holes in the back of the TV. Then, bring the measuring tape up to the very top of the TV. So if your mounting holes are at 1 inch, find the mark (or inches) at the very top of the TV. For example, if the top of your tv lands on 16 inches you would mark that.  

2. Then, place the meausring tape on the wall. With the 1 inch mark (where your mounting holes are at the bottom), and the mark where the top of your TV is at the top. Move the measuring tape up or down depending on where you want the top of the tv to be.  

3. Mark a dot on the wall in your 1 inch mark. This is where you will place your color guide and complete your installation.