HangSmart NO STUD Soundbar Mount DIY (WHITE)

Yes! The HangSmart Soundbar Mount has been rigorously tested to hold up to 50 lbs safely. Most soundbars weigh under 15 lbs, so you're well within range. The design uses the same patented 45° angled nail system as our TV mount. Installed correctly, it anchors into drywall or plaster without studs, using physics and distributed weight for stability.

Our no-stud mounts are primarily designed and tested for use on standard drywall (gypsum board). While some users have successfully installed the product on certain types of plaster walls, we generally recommend using specialized hardware for plaster to ensure the safest installation, especially for heavy items like a TV.

The Soundbar Mount is universally compatible — whether your soundbar is long, slim, or heavier-duty. It's adjustable to fit the most popular models including Sonos, Samsung, Bose, Vizio, and more. The soundbar mount is adjustable up to 5 inches. So ensure that your soundbar depth is within 5 inches.

Typically 0.5–1 inch, enough to manage cables without removing the mount. If you need more space, you can extend the adjustable shelves out slightly and pull the soundbar forward.

Yes! It's designed to install directly under your wall-mounted TV, including TVs installed with the HangSmart TV Mount. The two products are complementary and create a seamless floating setup.

Yes. Like the TV mount, you simply lift the soundbar forward and up off of the shelf. This makes it easy to change out or service your soundbar without damage.

Removal is quick and easy. First, detach the side security brackets and lift your soundbar shelf off the wall bracket. Once the shelf is out of the way, take a pair of pliers (or the back of a hammer) and gently pull the angled nails out one by one until the bracket releases from the wall. The nail holes are tiny (pen-tip sized), so cleanup or patching is simple if you're relocating or moving.

Most soundbars use standard slots or screw holes. Our Soundbar mounts work differently. It rests on a shelf, so you do not need to screw any nuts or bolts into the soundbar itself.

Nope — that's the beauty of the HangSmart Soundbar Mount. Our patented angled nail design anchors directly into drywall or plaster without the need for studs or bulky anchors. The mount is lab-tested to hold up to 50 lbs, while most soundbars weigh less than half of that. If you're mounting into brick, concrete, or stone, you'll use the included screws and anchors instead — but for drywall installs, no anchors are required.

Cable management with the soundbar mount is simple. Because the mount sits slightly off the wall, you'll have enough clearance to route HDMI, optical, or power cables directly into the back of your soundbar. For outlets positioned directly behind your setup, cords can be tucked out of sight behind the soundbar itself.

If your power outlet is lower on the wall and cords need to run down toward the floor, we recommend pairing the Soundbar Mount with our HangSmart Wire Concealer Kit. It neatly hides cords inside a sleek channel that runs straight down to your outlet.

For even more clearance, you can use the included spacers and longer screws to bring your soundbar slightly forward, giving you extra space for plugs and cable routing. We also feature plenty of video demos on our social channels showing how customers have managed cords in different setups — feel free to check those out for inspiration!

Unlike the HangSmart TV Mount (where the guide is hidden behind the screen), the Soundbar Mount guide would be visible below your TV. For that reason, we recommend tearing it off the wall once you're finished with installation. The guide is designed with perforated tear lines, making it easy to remove cleanly without damaging your wall.

Yes! You can find the full Soundbar Mount installation video on our How-To Page. The video walks you step-by-step through the entire process. Most installs take just a few minutes — even if it's your first time.

We also include shorter tip videos on the same page, showing tricks like using spacers for extra clearance, managing cables, or removing the mount cleanly. Once you've installed one HangSmart mount, the process becomes second nature and is repeatable across any room.

The HangSmart Soundbar Mount is crafted from high-grade aluminum, chosen for its strength, durability, and sleek appearance. Unlike cheap plastic shelves, our aluminum construction ensures your devices are safe and supported, while still looking modern and minimal. The matte finish blends seamlessly into any room, whether you're mounting it in a living room, bedroom, or office.

No! We specifically designed the HangSmart Soundbar Mount to prevent sagging or forward lean. Thanks to our patented angled-nail system and bracket design, the weight is distributed evenly against the wall rather than pulling outward.

Traditional brackets and shelves that rely only on screws (and sometimes anchors) often create large holes in the wall. Over time, those holes can widen and cause the mount to droop. With HangSmart, the 45° angled installation locks the mount into place, keeping it stable for the long term. Once installed properly, you won't see sagging or forward lean — just a clean, floating setup that stays secure.

The shelf supports up to 25 lbs. Perfect for routers, modems, Apple TV, Roku, Alexa, Google Nest, gaming consoles, cable boxes, and décor.

Yes. Like all HangSmart products, it uses angled nails and a patented elastic mounting system. As long as it's installed properly, it will not come loose. For heavier loads or non-drywall walls (brick, concrete, etc.), use the included screws and anchors.

Definitely. Many customers use two or more shelves to create a stacked look for multiple devices. Each shelf installs independently, giving you flexibility in spacing.

Not at all. The nail holes are as small as a pen tip. If you remove or relocate the shelf, the holes can be patched in seconds with standard filler.

The shelf is designed for compact electronics and accessories. It easily fits: Streaming devices (Roku, Firestick, Apple TV), Smart home hubs (Echo, Google Nest), Small gaming consoles (Switch, PS5 controllers), Cable/satellite boxes, Routers & modems.

Yes. For drywall → use the nails. For harder walls → drill with an 8mm bit, insert anchors, then screw. Both methods are included in the instructions.

Yes. Many customers pair the shelf with the HangSmart TV Mount to hold devices, remotes, or streaming boxes. It keeps everything tidy, elevated, and within reach.

Yes — visit our How-To Page for a step-by-step guide. The install takes less than 5 minutes.

The Smart Device Shelf is most commonly used for mounting rear surround speakers, making it a perfect companion to our Soundbar Mount if you're setting up a complete home theater system. Many customers also use it for smart devices like Apple TV, Roku, Amazon Echo, Google Nest, Wi-Fi routers, or even small gaming consoles. Its versatility means you can mount almost any compact device neatly and securely, right where you need it.

Yes! The shelf has a built-in cable management hole that allows you to run audio and power cables directly through the back of the shelf. This design makes it easy to keep cords tidy and out of sight, especially when paired with our HangSmart Wire Concealer Kit. Whether you're mounting speakers, a streaming device, or a router, you'll have a clean, professional look without messy cables dangling down the wall.

The Smart Device Shelf is crafted from high-grade aluminum, chosen for its strength, durability, and sleek appearance. Unlike cheap plastic shelves, our aluminum construction ensures your devices are safe and supported, while still looking modern and minimal. The matte finish blends seamlessly into any room, whether you're mounting it in a living room, bedroom, or office.

No! We specifically designed the HangSmart Smart Device Shelf to prevent sagging or forward lean. Thanks to our patented angled-nail system and bracket design, the weight is distributed evenly against the wall rather than pulling outward.

Traditional brackets and shelves that rely only on screws (and sometimes anchors) often create large holes in the wall. Over time, those holes can widen and cause the mount to droop. With HangSmart, the 45° angled installation locks the mount into place, keeping it stable for the long term. Once installed properly, you won't see sagging or forward lean — just a clean, floating setup that stays secure.